Also eigentlich war das brennen von dvd mit nero und dem PIONEER DVD-RW DVR-105 kein problem noch seit einiger Zeit bringt nero dann immer diese Fehlermeldung:

...Start der Simulation mit 1*(1.3800 kb/s)
...PIONEER DVD-RW DVR-105
...Write error
...Simulation nicht er......

und das macht er auch beim brennen nicht nur beim simulieren

ich benutze dvd-r dvds und das hat auch immer geklappt

Protokoll:

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 338MB (346376kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

30.10.2003
ISO Zusammenstellung
00:39:22 #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

00:39:22 #2 Text 0 File Reader.cpp, Line 115
Reader running

00:39:22 #3 Text 0 File Writer.cpp, Line 123
Writer PIONEER DVD-RW DVR-105 running

00:39:22 #4 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)

00:39:22 #5 Text 0 File Burncd.cpp, Line 3811
Turn on Disc-At-Once, using DVD media

00:39:22 #6 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1848 (1848) = #1848/0:24.48
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

00:39:45 #7 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 1847 ( 0:26.47)

00:39:45 #8 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

00:39:45 #9 Text 0 File DlgWaitCD.cpp, Line 1452
Recorder: PIONEER DVD-RW DVR-105;
CDR code: 00 00 00 00; CD manufacturer unknown
ATIP Data: ?

00:39:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 822
Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 4091904

00:39:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1848 (1848) = #1848/0:24.48
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1848 blocks [PIONEER DVD-RW DVR-105 ]
--------------------------------------------------------------

00:39:49 #12 Phase 32 File dlgbrnst.cpp, Line 1653
Simulation started at 1x (1.380 KB/s)

00:39:49 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

00:39:49 #14 Text 0 File DVDR.cpp, Line 1235
Recording mode: Sequential Recording Mode for Multisession

00:39:49 #15 Text 0 File Mmc.cpp, Line 17311
Set BUFE: supported -> ON

00:39:49 #16 Text 0 File Cdrdrv.cpp, Line 7442
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist

00:39:49 #17 Text 0 File Writer.cpp, Line 314
00:39:49.968 - PIONEER DVD-RW DVR-105 : Queue again later (Intervall : 47msec)

00:39:58 #18 SCSI -1135 File Cdrdrv.cpp, Line 1402
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x026E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

00:39:58 #19 DVDR -1135 File Writer.cpp, Line 331
Write error

00:39:58 #20 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

00:39:58 #21 Phase 133 File dlgbrnst.cpp, Line 1653
Writing short lead-out

00:40:43 #22 Phase 34 File dlgbrnst.cpp, Line 1653
Simulation failed at 1x (1.380 KB/s)

00:40:43 #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 24.10.2002 15:59:48 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

-------------------------------------------------
keine ahnung was ich machen soll vieleicht könnt ihr mir ja helfen.. a ich benutzte nero 5.5.10.7
m.f.g fabian

Hallöchen,

hast du denn irgendwelche Änderungen am PC gemacht? Vielleicht Einstellungen verändert oder Software installiert oder deinstalliert? Ist es noch die gleiche Rohlingmarke wie sonst oder hast du schon mal andere Hersteller verwendet?

Laufen noch Programme im Hintergrund die vielleicht stören könnten (Antivirensoftware..)