Hallo,

Ich habe das Problem das mein Brenner LITE-ON LTR-52246S
Beim Brennen tut er immer bis 6% oder 7% brennen und dann dreht er und dreht er .. bis sich eine Fehlermeldung zeigen lässt.
Was ich jetzt im Anhang dieses Thrends angehangen habe sind die Fehlermeldungen.

Schau es euch mal an und sagt mir mal ob ihr es m,al hattet oder so




Anhang:
-------------------------------------------------------------------------------------
"
"
1A23-8131-1039-8131-6288-9065

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 15:25:04
Nero Version: 6.0.0.19
Recorder: <LITE-ON LTR-52246S> Version: 6S0F - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 1 - 6.0.0.19
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic STEALTH DVD st3wolf Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON LTR-52246S E: CDRom0
TOSHIBA DVD-ROM SD-M1612 F: CDRom1
AXV CD/DVD-ROM H: CDRom2
Generic STEALTH DVD G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 204MB (209444kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.4.2004
CD-ROM (ISO)
15:12:03 #1 Text 0 File Isodoc.cpp, Line 5950
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:12:03 #2 Phase 90 File dlgbrnst.cpp, Line 1843
Buffer Underrun Protection activated

15:12:04 #3 Text 0 File Reader.cpp, Line 118
Reader running

15:12:04 #4 Text 0 File Writer.cpp, Line 127
Writer LITE-ON LTR-52246S running

15:12:04 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

15:12:04 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-Once, using CD-R/RW media

15:12:40 #7 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 302916 (67:20.66)

15:12:40 #8 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE

15:12:40 #9 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

15:12:40 #10 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unbekannt. Medium required by compilation: CD-R/RW.)

15:12:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 302917 (302917) = #302917/67:18.67
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 302915 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

15:12:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [LITE-ON LTR-52246S ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 620681216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
302917 | lead-out | 1 | 0x00 | 0x41

15:12:40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 965
Removed 2 run-out blocks from end of track 1.

15:12:41 #14 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

15:12:41 #15 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

15:12:41 #16 Phase 28 File dlgbrnst.cpp, Line 1843
Speed measurement started

15:12:41 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:13:06 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:13:07 #19 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:13:07 #20 Phase 29 File dlgbrnst.cpp, Line 1793
Speed measurement completed: 156,8x (23.520 KB/s)

15:13:07 #21 Phase 32 File dlgbrnst.cpp, Line 1843
Simulation started at 52x (7.800 KB/s)

15:13:07 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:13:07 #23 Text 0 File Mmc.cpp, Line 19195
Set BUFE: supported -> ON , SMART-BURN : ON

15:14:47 #24 SCSI -1135 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03F20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

15:14:47 #25 CDR -1135 File Writer.cpp, Line 335
Write error

15:14:47 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:14:47 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

15:14:47 #28 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
LITE-ON LTR-52246S\H1 T0

15:14:47 #29 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

15:14:47 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

15:14:53 #31 Phase 34 File dlgbrnst.cpp, Line 1843
Simulation failed at 52x (7.800 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 18.08.2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

-------------------------------------------------------------------------------------

Hi,

hast du es schon mit anderen Rohlingen und mit einer niedrigeren Geschwindigkeit probiert?

Gruß Jinxy

ja hab ich schon versucht .. aber es ging net

Hi,

du benutzt eine etwas ältere Version von Nero. Hol' dir doch mal die neueste.

Gruß Jinxy

hmm welche ist den die neuste?

Hallöchen,

die neueste Version, derzeit glaube ich 6.3.1.6, bekomsmt du natürlich direkt auf der Herstellerseite:

http://www.ahead.de/de/nero-prog.php

Hi,
eine andere Möglichkeit wäre noch, das Stealth-Laufwerk zu deinstallieren. Das bereitet des öfteren auch Probleme. Versuche es einfach einmal.

Gruß Jinxy

es kann net an dem liegen, ich hab doch 2 PC`s und bei dem anderen ist es genau so obwohl da des laufwerk nicht execstiert. bei meinem schager ist das lauferk aber auch da ... denk net das es an dem liegen kann, ich versuche grade das update zu installieren, dann werden wir mal weitersehen